Replacement filter stage 1 mini cab MFP

The stage 1 replacement filter for mini MFP booths consists of No.1 pack allowing the following replacements depending on the booth model:

- no.10 filter change for version 10

- no.6 filter change for version 15

- no.5 filter change for version 18

The high-efficiency corrugated cardboard with offset holes is housed in special guides and secured laterally with screw-on paper retainers that make replacement very easy.

Stage 1 filtration of the mini suction booths consists of two layers of special non-flammable pleated paper with alternating holes. This special system allows the air to change direction so as to push the paint particles inside onto the second stage of filtration.

TECHNICAL DATA FILTER PAPER

Thickness 60 mm

Front layer Paper 260 g/m2

Back layer Paper 250 g/m2

Recommended air velocity 0.5 to 1.0 m/s

Pressure drop at 0.75 m/s 3 mm H2O

Maximum recommended pressure drop 13 mm H2O

Possible up to 25 mm H2O

Storage capacity at 0.75 m/s - 130 Pa

(depends on the type of paint used) up to 18 kg/m2

Filtration efficiency (0.75 m/s)

(depends on the type of paint used) 91% - 98% (ASHARAE 52.76)

Maximum temperature of resistance 180°

Recommended number of folds per meter 26

Color white