Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
page
0,00
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
page
0
30/01/2019

Welding fumes and fixed workstation? The hanging purifier is the solution

In the case of fixed workstations, the welding of the air gas purifier thanks to the compact dimensions and the brackets can be easily installed in the vicinity of the processing to be performed and then aspirate the fumes using the practical self-supporting suction arm to move.

Welding fumes and fixed workstation? The hanging purifier is the solution

Welding fumes are toxic, how to solve when there is no possibility of chimney

In the case of fixed workstations, the WFU welding fumes hanging purifier thanks to its compact dimensions and the brackets can be easily installed near the work to be carried out and then suck the fumes using the practical, self-supporting and lightweight suction arm to move.

During the welding of metals, fumes, dust, and gases are produced containing dozens of different and harmful chemicals that remain suspended in the air in the form of micro-powders metal particles or metal derivatives (for example oxides), but also dust and fumes from filler materials (electrodes, rod electrodes, lead, welding powder, etc.) or these are removed from the coating as paints, coverings, and detergents.

It is therefore of fundamental importance to use a welding fume purifier designed for the aspiration and filtration of fumes and micro-dust generated during metal welding processes, so that they are aspirated before reaching the respiratory tract of the operator.

ADVANTAGES

  • Rapid fume extraction near the source due to high flow rate
  • Simple wall or column installation
  • Filtration with absolute filter eff. H13 99.95%
  • Complies with CE and national regulations

How does it work?

This overhead welding fume purifier sucks the pollutants through the system from the arm and is purified to 99.9%
At this point the clean air is returned into the environment through grids positioned on the sides of the machine or on request an ejection kit is provided.

Environmental safety

The level of clogging of the filters is monitored by a control that alerts with a light signal when it is necessary to clean or replace the filters, so as to avoid continuing work without air filtration. The electrical panel is included in the kit.

Technical data

Nominal flow rate: 1.500 mc/h
Motor power: 1.5kw 220/1/50
Residual pressure: 500 Pa
Stage 1 filtration: spark-proof metal filter eff. G3
Stage 2: Acrylic filter eff. G4 according to EN 779:2012
Stage 3: absolute filter eff. H13 99.95% @ MPPS in acc to EN 1822:2009
Dimensions: mm. 700x700x1100 H (only filter body without arm)
Total weight: 110 kg ca

Construction

  • Supporting structure in sturdy galvanized steel or painted depending on the application, equipped with practical handles for handling and 4 pivoting wheels with brake
  • CE standard electrical panel with on/off ventilation control and safety light for clogging filters
  • Single suction centrifugal fan in directly coupled version with single phase asynchronous motor
photogallery
Ask for further information

Fill in the form below to request a quote by email, agree on special conditions, or technical clarifications








    Privacy Policy *

    Letto e compreso

      0
      Your Cart
      Your cart is emptyReturn to Shop